Installing Volumio on Raspberry Pi

Things You Will Need

• A microSD card at least 4 GB https://amzn.to/36CpShC | https://amzn.to/3CXJngt | https://amzn.to/3JqyxSP

Downloads and Flashing to MicroSD

1. Download Volumio Download
2. Download Balena Etcher Download
3. Run Balena Etcher
4. Burn the Volumio image to microSD card
5. Safely remove microSD

Booting to Volumio for the First Time

1. Plug the power adapter and network cable into the Raspberry Pi
2. You should see the Volumio terminal running startup scripts
3. After several moments, the scrolling text will stop, press Enter
4. Login with username root and password volumio
5. Type ifconfig and press Enter to display the IP address
6. On a separate device, open a web browser and navigate to http://IPfromAbove to access the Volumio web interface. Depending on your network setup, you may be able to reach the device by opening http://volumio.local as well
7. Follow the setup wizard to complete the Volumio configuration

Source: https://volumio.com/